10 replies
by mikebarich
by jamesgreenan
by jamesgreenan
by popeye_doyle
As last entry, check that your system can hold the extra memory, check that type being used, i.e Dram, Sdram etc, is compatible to the Motherboard,
contact your Technical Support to see if you need to Flash the Bios, or depending on operating system need to parallel install, try your original memory in the other slot. Occassionally XP will not recognise extra memory, this may be the reason.
by jamesgreenan
by thechas
There are articles at both Kingston's and Intel's web sites on problems with DIMM compatability.
Many older motherboards require a specific DIMM design, and the newer DIMMs just will not work in them.
I have also seen numerous DIMMs that will not work together.
If I am understanding what you have going on correctly, you have 256MB, and are attempting to add another 256MB.
What OS are you running?
If Windows 9X or Me, forget the extra 256MB.
Why, most systems have problems with more than 511MB of ram with 9X.
This is very configuration dependant, but most of the time, systems fail to boot, or run very slow with more than 511MB of RAM.
If you need more RAM, add in a 128MB.
Chas
by mdelyea
by htn
by jamesgreenan
by jamesgreenan
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending