8 replies
by cjc5447
by korgmeister
nowdays it is not efficient and expensive to purchase such terminal. basically it is all the same thing with normal computers except with different size and design
however you can try to take the ram out and plug it in old computer it if works, then you can purchase any pc133/100 ram. i recommend you should purchase the max amount of ram if possible.
if the terminal is using RDRAM it would be a bit tough to find it nowadays.
by hal 9000
You'll have to actually look at the installed RAM if it has memory modules on both sides of the Stick it most likely is the Low Density variety and will be very hard to get. If you use High Density RAM on a M'Board that only recognizes Low Density it will only read half of the available RAM and will most likely have timing issues as well so you'll get random shutdowns or fall overs which is not what you want.
There is a Utility available that will tell you who made the M'Board and it's model so if you run this you can then download a copy of the M'Board manual {maybe} and read it to find out just what is required. Download CTBIOS from here and run it in Windows to find out the information on the maker of the M'Board.
http://www.biosman.com/bios_utils.html
Col
by rg11
Poster rated this answer.
by dmiles
compare the memory size using this as reference
Type
FPM ? Fast Page - If you have a 486, you probably have FPM
EDO ? Extended Data Out - If you have an early Pentium system, you probably have EDO
SDRAM - If you have a Pentium or Celeron system purchased in 1999, you probably have SDRAM
Sockets
Memory modules plug into a socket on the motherboard. There are three socket types.
SIMM ? 30 pin ? 3 inches in length
SIMM ? 72 pin ? 4 inches in length
DIMM ? 168 pin ? 5 inches in length
Most older 486 machines will use 30 pin modules. Later model 486 and Pentium machines will probably use 72 pin modules. More recent Pentium machines may have 168 pin.
by willcomp
Nearly all PII and most PIII systems require low density SDRAM (either single or double density). SDRAM currently sold at retail is high (quad) density and will not work.
As mentioned previously, RAM may also be SODIMM notebook type memory.
If RAM is, in fact, SDRAM or SODIMM, I recommend purchasing from Crucial. Web site is crucial.com. You can call them with particulars and they will guarantee compatibility.
Dalton
by rg11
by edlevin
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending