Discussion Locked

Modem driver for HP Vectra VL400 MT...

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Here is the problem, I installed WinXP Pro on an HP Vectra VL400 MT, 800MHz, 128MB RAM. I ran into a problem with the modem. I can?t find the driver for it. Its a SMC 56k, model number: smcfm1001. I looked in HP.com and the SMC website, aswell as Driver pages. With no luck, I really need to solve this, my client doesn?t want another modem, I told him he is better off getting another 56k or just getting Cable Internet....oh well

12 replies

by jamesrl

I just bought a bulk modem for $7.95.....with drivers!

Before you spend inordinate amounts of money, you might try looking at the chipset. I did a little search, and it looks like your modem is a SMC EZ connect Internal PCI modem supporting V.92. If so, then try this driver - if you are using the same chipset that is:

http://members.driverguide.com/driver/detail.php?driverid=125295

I found it on a mexican e-commerce site, its quite possible that the fm1001 is not a US part number but a foreign one.

Hope that helps.

James

by jamesrl

I just bought a bulk modem for $7.95.....with drivers!

Before you spend inordinate amounts of money, you might try looking at the chipset. I did a little search, and it looks like your modem is a SMC EZ connect Internal PCI modem supporting V.92. If so, then try this driver - if you are using the same chipset that is:

http://members.driverguide.com/driver/detail.php?driverid=125295

I found it on a mexican e-commerce site, its quite possible that the fm1001 is not a US part number but a foreign one.

Hope that helps.

James

by willcomp

Try installing and running Everest Home. It should identify the modem and provide chipset information. Once you have chipset, may be able to download generic drivers from chipset manufacturer's web site.

If it is a Motorola SM56 chipset (which it may be), here's a link to drivers.

http://www.motorola.com/softmodem/driver.htm

Dalton

by unidentified

Try using the standard driver supplied by XP then diagnose the modem on the control panel. Make sure it is communicating properly and it will work just fine

Niwroc

by grbeckmeyer

I think James has the right idea. Just to put this in perspective...
Even if your billable time is as low as $40/hr (pretty ridiculously low!), if you've spent more than 12 minutes on this, you would have been better off just replacing it. OK, I know, there would still be time involved in installing a new one. But the bottom line is, a new modem is cheaper than 12 minutes of your time (hopefully less time than that, $40/hr is too low)

This discussion is closed to new replies.