Question Locked

modem trouble

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello.Newbie here so please be patient.
We need both our computers for our business but one cannot connect at all online.
Problem is:Under the general tab in dial-up isp properties window in the connect using space is:
red x with"Modem removed-unavailable device(com1).
I have tried making a new connection and have made numerous calls to isp.
Before this problem I was getting Error 50 and Error 31.
The problem computer is running win xp and modem is a soft v92 data fax modem with smartpc.When I run diagnostic check it says everything is ok and modem is on com 3.
Can anyone help with this problem?
Thanks so much.

12 replies

by hal 9000

You appear to have a configuration error where the computer thinks that the modem is attached to Com 1 and not Com 3 you need to change this setting.

It's been a long time since I've worked with Software Dial Up Modems which is what you have here but you should be able to alter the basic setting in the Modem Proprieties Panel.

Col

by nancydrew

Hi Hal,
Tried to change the port settings in the modem properties which it let me do,but when I tried to make a new connection it still came up with the "modem removed unavalable device-(com1)"in the general tab under isp properties.
However it shows the modem with no conflicts and working ok everywhere else.

by toma

Edited

Message was edited by: beth.blakely@...

by ugadata

Try removing the modem from the device manager, then reboot the computer. As the computer reboots it should re-detect the modem. The driver should still be on PC but it wouldn't hurt to have the driver cd or floppy available.

by nancydrew

Thanks so much.This proved to make the isp properties recoginize the modem,however now I get Error 31 after it verifies user name & password.

by ugadata

Are you manually clicking the dial-up network connection to initiate the connection or are you starting your browser/e-mail program and connecting automatically?

Perhaps even more important, are you typing in your username and password or are you relying on saved username and password combination?

If you may want to try a fully manual connection by clicking (double clicking) on the Dial-Up Network connection for your ISP and then manually type in the username and password.

Do you have 2 separate ISP accounts or are both computers are trying to use the same account?

by nancydrew

I am connecting by clicking on start,then clicking on isp icon on the "connect to" tab.
I have the user name and password stored,as they are already in the window after clicking on isp icon.
I will go make changes to change it over to manual.
We both have same internet connection-(for now),but have not gone into networking,so only one pc online at a one time.We are small company just getting started.
Usually our 4 employees has very different hours.One is on holiday,and hope to have issue resolved by the time she returns.

by hal 9000

By entering in the User Name & Password. If it is you can get along with things but by your description a simple Peer to Peer Network and a ADSL Connection may be cheaper for the company than using a Dial up connection which is much slower and costs more for less data transfer than the Dial Up connection.

All that would be required to network these 2 computers together is a Router with several Ethernet Ports generally 4 as a base model and some CAT5 Cable and you would be up and running and be able to transfer files and browse the other computer without the need to dial up the Internet and tieing up a phone line that could be used to generate business while still having a ADSL Connection running through it.

Col

by nancydrew

Thanks Col-
We are going to look into the peer to peer option,hopefully very soon within the next two weeks.
But the original problem still not fixed.

by hal 9000

It has to be a modem setting or do you need to add a number in to get an Outside Line to dial out?

I spent close to a week about a year ago making a dial up modem connect to a Government Agency and all as a result of an incorrect setting in the modem setup supplied by the software vendor.

Reestablish a new ISP connection through the Wizard after first deleting the original one and see if that works. It should be a slow setting set by default and it should work provided that you are getting a Dial Tone. If that works you can then set about configuring the modem to faster speeds which you will not see but you don't need to software limiting the thing down to less that what it's capable of achieving either.

You may need to change the settings of the modem to access an outside line or the type of dialing that is used where you are.

[b]Also[/b] while you are at it check the phone number that you are dialing it's possible that it was entered incorrectly and is the problem. I know that it sounds stupid and too easy but it's often things like this that get you caught. Also if you are going out through something like a PABX Phone System and you need to dial 0 you can not add this to the front of the phone number as it will dial before a Dial Tone is received.

Col

by ugadata

From the last reply I take it that manually typing in the username and password didn't make difference? (what I could find about error 31, indicates a problem with the signon credentials. Username may need to be username@domain instead of just username or in the case of stored credentials the password has been changed but the stored password has not.)

I presume this computer used to connect to the Internet OK in the past.
Have you opened the ISP properties on the the computer that will connect and verified the configuration is the same on the computer in question?
You could also try a different wall jack (phone line), as well as a different phone cable between the computer and the wall jack.

Ultimately, I would agree with HAL 9000 (as you do) that a simple network to share a DSL connection would be a better way to go in the future.

This discussion is closed to new replies.