8 replies
by budwenkin Accepted solution
by hal 9000 Accepted solution
You have to get into the BIOS. There should be a setting under a heading like setup that will allow you to change the boot order. This really depends on the BIOS that is used as to how you change this but as it's currently trying to boot from a LAN it will be reading First Boot Device = LAN, Second Boot Device = HDD or Floppy and there may not be any other alternatives for a third Boot Device. This just depends on how old and what is fitted.
But it should read First Boot Device is Floppy, Second Boot Device is CD ROM and third Boot Device is HDD 0. IBM are a bit strange but you should be able to download the users manual from their Web Site and that will tell you how to alter the BIOS. You should find what you are looking for here
Col
by budwenkin Accepted solution
Ok, I found the BIOS and believe I have found where to change the order. Now my issue is that after I change the order it tells me to save and exit press f9. It beeps at me when I do this and does not save. I cannot get it to save and now that is where I am stuck.
Also, I am now able to log onto the pc because I got the password and login. It is logging into a domain and I just want to reinstall xp so that I will not have to do this. Since I am not the administrator of this it will not allow me to make many changes. When I place in the XP disk and open it up it will not allow me to install because it says that the disk that I have is an older version of XP and that the newer version is on my pc and will not allow me to go any further. I am stuck.
by hal 9000 Accepted solution
Right and for that I suggest that you download the manual as sometimes the screen instructions are not correct. You should move to the exit option in BIOS and when you click on that you should be asked do you want to save the changes or not in this case you would press on the Yes Option.
To reload XP all you really need do now is wipe the HDD with a utility like Boot & Nuke available here
And then you can perform a clean install of XP from your CD's.
Col
by unicosm Accepted solution
by w2ktechman Accepted solution
Flash the BIOS first.
Use a utility to wipe the drive (from a boot floppy). This can be done with a Win boot disk (format), but I would suggest a drive scrubber.
Re-partition the drive (FDISK)
Then you should be able to reinstall the OS. Make sure to obtain the drivers for the notebook (put them on a cd if possible).
But before connecting to the Internet
Grab SP2 and other critical updates, and put them on cd as well.
download or purchase AV and a good firewall
Then install all of these, then connect to the Internet and grab other updates.
by rocketgirl9 Accepted solution
by brucechandra Accepted solution
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending