netware4.11 DOSpartition
How do i creat 15MB DOS partition when installing netware4.11 as one need at least 115MB of disk space for serverinstallation.Is this straight partition?
Please help.
Desktop
How do i creat 15MB DOS partition when installing netware4.11 as one need at least 115MB of disk space for serverinstallation.Is this straight partition?
Please help.
by jeekaette
by bukayo520
Not much relevant.
Thanks anyway
by tbradley
You mention that this is going to be a new install right?
The first thing is to forget the DR Dos that comes with 4.11, as it difficult to use.
Get yourself a Dos 5.0 or 6.22 boot disk, with format.com and fdisk.exe ( com ? ) on it. Also have your CD-rom drivers loaded on it, and in config.sys and autoexec.bat
Boot with the floppy, fdisk the drive, giving yourself a 115mb partition, and format it using format c: /s ( make it bootable )
Re-boot using the floppy, and load netware from the CD. There will be an option when loading to use the current partition. Use it.
Once Netware is loaded, you will have to manually change the autoexec.bat file on the Hard drive to start server at bootup.
At the dos prompt, type
c:\copy con autoexec.bat
c:\cd c:\nwserver
server
( to save, hit the ctrl-Z )
Two very important notes....
DO NOT USE THE WIN95 OR WIN98 BOOT DISKS, as the Kernel they load hoses Netware, and steals memory.
Do not load any memory managers in Config.sys as this will limit any memory in your server to 64mb.
good luck
by bukayo520
Netware needs a 15 MB partition to BOOT from DOS, and then mount the sys volume, where it can take up to 150MB to get th OS installed.
Double check your numbers, but I am currently using 200MB for DOS partition and 2 GB for sys volume.
You need to create only the first dos partition with fdisk, then format /s, boot from HD, then load DOS drivers for the cdrom, and begin isntalation from cd.
by bukayo520
by bukayo520
This discussion is closed to new replies.
Sort by Trending