Discussion Locked

Network 2 PC's.....

0 helpful
14 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am fixing a WinXP PC, it won't boot or anything. How can I connect my PC (Win98SE, Compaq 5000, Intel Celeron 700) to the other WinXP Pro, Athlon Duron 1.7, Generic Brand) So I can access it to fix it and more importantly to format it so I can Re-Install WinXP on it?

14 replies

by statykserver

Since the Winxp won't boot or anything you cant connect to it from your other computer. If the pc passes its POST test and you are going to format and reinstall WinXP then you should be able to boot from the windows cdrom and format and install from there.

by sgt_shultz

right idea, wrong approach. install an ADDITIONAL xp installation on the bad box. boot from xp install cd, run setup. say you want to install, not repair (you can try repair). before it overwrites the old os, it looks and finds it and offers to repair it. i would try repair at this point. but anyway, simply notice if enuf hard disk space then install in new folder and you will have bootable install that can read and edit the registry etc on bad install. see how to do this parallel 'rescue' install of xp step by step at support.microsoft.com also see how to edit registry using this rescue install to force rebooting to freeze at bsod so you can look up error at support.microsoft.com for exact fix instructions.
having said all that, have you tried last known good configuration yet? tap f8 key during cold boot. at start up menu, pick Last Known Good Configuration

by w2ktechman

First, if you are intent on doing it this way, you will need some tools. A bootable disk that can read NTFS would be needed, and network access would be needed. I would Suggest ERD Commander for this, but it is pricey. You may not even need to rebuild, as you may be able to fix the problem with ERD Commander.
For a cheaper route. I would suggest taking the HDD and installing it as a slave drive on another system, retreiving data or whatever, and then reinstalling it as master and rebuilding. Or even using the XP disk and running a repair option, or recovery console.
Where is the boot stopping??? What is the error (if any). Have you tried Safe Mode??? or Recovery Console? Have you tried unplugging all non-essential peripherals???

by cyberghost_1

I got it pretty much, now the problem is that the CD Key doesn't work...Any thoughts on that? NOTE: I AM USING A BURNED COPY OF WIN XP, WITH THE ORIGINAL CD KEY.

by rindi1

I'm not sure if i understood you correctly. The product key you have, does it belong to your PC or to the copied CD? The key has to belong to the source media you are using to install, otherwise it won't work.

by willcomp

Is key for original XP CD that was copied? OEM keys will not work with retail version of XP and vice versa.

by petevfi

Hi!

I think there is no way to get a dead PC to be connected to/from another machine ...

The only way is first to get the WinXP machine to an independent working status once again, maybe throuh a WinXP re-installation, and first after that to get it connected to a network and to another machine.

But, if the machine do not even boot-up pertinently, it may be much more rocky way to get it into life once again ...

Please, come back, if not easily succeeding with all this.

Best regards,

Pete V.

This discussion is closed to new replies.