Question Locked

Network printer DNS problem

0 helpful
13 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Hi everyone this is my first post and I have tried searching but I couldn't find anything that was helping. I have a okidata c7350 network printer that has an ip of 10.1.2.201 and subnet of 255.255.255.0 and default gateway of 10.1.2.1 I cant ping it and no computer can print to it. The computers just say failed to print after it times out. When I print the network config page the DNS reads 0.0.0.0 for some reason it's not registering with dns. Please help I'm pulling my hair out over this.

13 replies

by cg it

whats the network address range?

if the network printer is 10.1.2.201 with a subnet mask 255.255.255.0 that means the the last octet is the host portion and the first 3 octets are the network portion. Given that 10.X.X.X is in the Class A range which is the first octet is the network portion and the last 3 octets are the host portion, this could possibly be the problem.

Of course you could be using VLSM but you don't mention it.

need more info.

DNS doesn't mean a thing unless you are trying to find the resource by name rather than address. Could use LM hosts file or NetBIOS over TCP/IP with LM hosts file.

by perksa

I don't know what you mean by octet I'm not familar with that.

by cg it

basic routing and addressing terminology.

an octet is 8 bits.

anyway, the 10.X.X.X addressing scheme is a Class A which the default mask is 255.0.0.0

255.255.255.0 mask is associated with Class C addressing in which the last octet [last 8 bits] represent the host portion of the address with the first 24 bits representing the network portion of the address. But that is irrelevent if your printer has the APIPA address represented with the 169.X.X.X . If this is the case then you won't be able to print to the printer if your network address scheme is 10.X.X.X

assign a static address to the printer on the same subnet as the network.

by sgt_shultz

check the subnet mask of a pc on the same network segment and see if the subnet mask is the same on the printer

by perksa

the subnets are the same 255.255.255.0 on the priner and the computer. It was printing before but some how the printer was reset to default settings of a 169 ip. There are other printers on the same network with the same settings but with different ips. I even tried to set it up with a different ip just in case it was conflicting but still no luck. I have also reset the nic for the printer and turned it off and back on. The link status is green and flashing on the 100mb tx rate led.

by ic-it

You must also set your DNS on the printer.
Should be just below the area you used to set the IP.

by perksa

I looked but I can't see anything that says dns just ip, default gateway and subnet. Maybe I'm missing something, could it be called anything else it's a oki data c7350. I downloaded the manual and I don't beleive I seen anything about dns in the network config portion. thanks

by perksa

Like I said in the first post, the printer was working on a static but when I checked it the printer somehow it got set to automatic. The automatic config set the printer to a 169 so I set it back to what it was prior which was 10.1.2.201 255.255.255.0 gateway way of 10.1.2.1 the computer also show the config of a 10.1.2.201 ip and the only way to install that printer from what I've seen from checking others is to setup as a local and input the ip manually because the printer dosn't show up when I try to search for it. When I print the network config everything looks good except it does not have an dns address.

by cg it

that has no DNS server to resolve name to address queries, a hosts file that has address to name mapping solves the problem. The hosts file works with NetBIOS over TCP/IP to make resources available on the network.

In a pure TCP/IP network without NetBIOS over TCP/IP, you should be able to ping all hosts on the network.

Windows platform computers all belong to a default "workgroup" which is a security boundry for each computer. The only way to share resources with computers on the same subnet is to join each computer to the same workgroup and then "share a resource" on a computer. That shared resource is then available via my network places. The shared resources can be folders, files, printers or other devices connected to the computer.

Network printers which are not a resource of a computer have an IP address. When installing network printers, not shared printers, you enter the ip address of the printer or the hosts name. If you use hosts name, as mentioned before, you need a hosts file which will resolve the name to an address.

by 1bn0

IF you can not connect to or ping the printer using the IP address , DNS is not goingto resolve your issue.

The purpose of DNS is to allow you to locate the printer using a name instead of an IP address. Even if the printer was registered in your DNS server, if it is not talking using the IP address you are not goingto get to using a dns name as the name simply gets resolve to the address and then your machine talks to the printer using the address.

You have other basic network issues to resolve first.

by rchandler

I had a similar problem when I replaced the main board in my 7350 -- the printer reverted to the factory IP, mask and gateway addresses. I think this is the "10" IP you are seeing. I changed these default values to the correct values for my printer and subnet via the keypad, selecting MANUAL for network address instead of Auto. Be sure to press Select after EACH segment of each of the three addresses to save what you have entered. It took a few tries, but I was able to make the revised addresses stick.

This discussion is closed to new replies.