4 replies
by jhpjr1 Accepted solution
by 1bn0 Accepted solution
In order to talk to the network your computer needs an IP address.
Typically, this is assigned from your router or high speed modem.
Your comuter is sending a DHCP request but not getting a response.
Reset your router and/or modem.
by why me worry? Accepted solution
Go to a command prompt and run an IPCONFIG /ALL command
If you get an IP address with the first two octets being 169.254.x.x then you are not seeing a DHCP server, thus explaining your connectivity issue. Also, if the device you are attaching to has a hard set speed and duplex setting at the port and your laptop's NIC is set to auto-negotiate, you will be dropping packets. The settings needs to match on both ends of the connection.
by langlier Accepted solution
1. Make sure that you are not set up with a static IP.
2. Verify the DHCP of your router is working.
3. Verify that you have no firewalls that would conflict
4. If you are using a utility other then the windows wireless configurator uninstall it (as well as any others that may be installed) and try again using the windows config.
5. Check for spyware or viruses that may be interfering.
Thats a good place to get started. If those do not work there is something larger at miss.
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending