Question Locked

new computer build, starts up for 1 sec then stops

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Just build my first computer. When i push the power bottom all the fans starts up for 1 sec then stops but the LED on the MOBO is still on. Then I unplug everything and just leave the RAM,MOBO, and fan then i press the power bottom again and the fan still just starts for 1 sec then stop.
Can anyone help me? please

2 replies

by rob miners

First thing to try is loosening the Screws that hold the Motherboard to the Case. They will only need a full turn. Reconnect the Power and turn it on. If it powers up shut it down and retighten the screws. They only need to be firm.

Carefully remove everything from the Motherboard. Remove the Motherboard and put it on an anti-static mat on a bench. Remove the Power Supply. Remove the Heatsink and give it a good clean. Remove the CPU and reseat it. Reinstall the Heatsink remembering to use CPU grease. Clean the golden edge of each memory stick with a soft rubber, remembering not to touch the golden edges. Check with one stick at a time, remembering to disconnect the power from the PC between checks. Connect a hard drive. If you have access to a PCI Video Card use it.

Reinsert the 20-24 pin power connector to the Motherboard. Connect a Keyboard and Mouse. Connect the Monitor. Connect the Power to the Power Supply. You can use a flat blade Screwdriver to short the Power pins on the Motherboard if you haven't got a spare switch. Turn it on and see what happens.

Letus know how it turns out.

This discussion is closed to new replies.