9 replies
by Member 22764616 Accepted solution
by markp24 Accepted solution
Hi
So you basically used a prior machines hard drive (and kep the exisitng windows installtion from the old machin on it) and upgraded the Motherboard, ram and CPU.
if thats the case then, Microsoft requires you to reactivate the product. You also may be required to reinstall the OS (i would recommend doing a clean install after backing up the drive and its data)(you most likly will need to reinstall all the applications as well, so make sure you have the original CD or installtion files), and you can restore the user data from you backup.
you may want to read these for clarification on Windows activation rules:
http://technet.microsoft.com/en-us/library/bb457054.aspx
by Member 22764616 Accepted solution
by Member 22764616 Accepted solution
by pittdaddy Accepted solution
by exec135crewdog Accepted solution
by oldbaritone Accepted solution
If the Windows was OEM to one brand, and you put a generic Mobo in, it probably doesn't have the drivers it needs. You need to boot from the OEM CD (did you make one?) and let it install drivers for the new hardware. You may also need to "Press F6 to install additional drivers" during boot. Then repair the installation.
And if it still doesn't want to boot, try putting the disk controllers on the new mobo into IDE mode in BIOS. Sometimes that works, and then you can d/l the manufacturer's drivers and install them to improve performance after Windows is up and running.
OR
Just bite the bullet and buy a retail-box edition
by trenton.wilkins Accepted solution
Windows uses a setup called a HAL (Hardware Abstraction Layer) to identify the PC's hardware. If you make more than a couple of changes at a time the HAL freaks out. Microsoft requires you to do a 'Repair Install':
Archived from groups: microsoft.public.windowsxp.hardware (More info?)
Repair Install to SET XP to New Motherboard
1. Do Not BOOT into Windows XP on first boot after Motherboard or Hard Drive
change! If booting from CD is not an option, return to BIOS and make sure
booting from CD is the first boot option. Booting into Windows is only an
option when you do a direct replacement of the Motherboard.
2. If your computer does not support booting from the CD, check your OEM or
Motherboard makers web site for updated BIOS.
3. Perform a Repair Install by following the step by step below.
When you see the "Welcome To Setup" screen, you will see the options below
This portion of the Setup program prepares Microsoft
Windows XP to run on your computer:
To setup Windows XP now, press ENTER.
To repair a Windows XP installation using Recovery Console, press R.
To quit Setup without installing Windows XP, press F3.
Press Enter to start the Windows Setup.
Accept the License Agreement and Windows will search for existing Windows
installations.
Select the XP installation you want to repair from the list and press R to
start the repair.
Setup will copy the necessary files to the hard drive and reboot. Do not
press any key to boot from CD when the message appears. Setup will continue
as if it were doing a clean install, but your applications and settings will
remain intact.
by oh smeg Accepted solution
If it's a System Makers OEM Recovery Disc most do not support the Option of what M$ call a Up Grade/In Place Install. The full details for performing one of these installs is here
http://support.microsoft.com/kb/978788
Most system Makers Recovery Disc's are bound to the Original Hardware and if it is not found you will get screwy Error Messages like M'Board not Found.
The way around this is to use a M$ branded OEM Install Disc or a M$ Retail Disc but not a System Makers Recovery Disc.
If you do not have a M$ Branded Disc with a Suitable Product Key you can not perform a In Place/Up Grade Install and you will not be able to use this HDD with this hardware as a working system.
Col
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending