Discussion Locked

No display & shut dwon on boot up

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

After installing new software (Nikon Coolscan)and selecting a colour option, the display went blank on trying to open the program. On re-booting the pc I now get no display and after the POST which beeps once, which I think is normal, the system shuts down. Is this just be a display driver problem or something more serious?
I also seem to have had more problems with software since changing to FAT32 than previously. Could this be the root cause of my problems?
I'd be grateful for any help.
Thanks

5 replies

by sc00by_uk

I'm assuming tha tyou are running a version of the windows operating system:
Can you get the system up in safe mode? (Press F8 just after the POST) If you can then you can reset your screen settings to something that will cause no problems and then see if it will boot.

If you can't get safe mode then you may be looking at somehting more serious...

by Member 34951599

Yes, running under Windows98. I have tried F8 but there's no display, - the monitor will not come out of standby mode as usual during boot up. The monitor is ok as have tried on another system.

by willcomp

I take it from your description and comment that BIOS screen does not display either on bootup i.e. no text, no graphic, no anything.

If that's the case HDD file system is definitely not the problem and it is not a driver issue.

Try removing and reseating your video adapter first or, even better, swap it out with another one known good.

Dalton

This discussion is closed to new replies.