First reseat the memory, and possibly try a different DIMM slot. When you say old, how old exactly do you mean?
Normally, if there has actually been a logical problem you will get some system beeps, telling you where a logical problem may lay. If you are getting nothing, then most likely, something has fully broken or not getting power. It is offen that a power supply problem, i suggest testing the powersupply, however, if there is a tripping fault, it may have caused damage to either GFX, SPU, RAM, or even MoBo, so I wouldn't like to test this on another valuable machine. Best idea is to use a known working PSU on the dead machine, rather than test the possibly broken PSU on a known working machine, as this could cause you two dead machines.
Also, check for any burning cornflakes smells, mainly coming from RAM, as the RAM gettings the highest baseline current from the PSU, and it is not uncommon with faulty PSUs for RAM DIMMS to actually burn, visually inspect all your contacts on your RAM, and PCI, AGP cards.
Other than that, it is a case or trying components one by one, swapping in possibly dead components into working systems.
Myself, I have made myself a really cheap working system for testing hardware, total cost was about ?180, then if when testing hardware, it damages anything, i've not blown up my Xeon or Dual Core Processors LOL.
Hope something here helps. Large local PC shops (that do repairs) may have a testing environment for PSUs, but I desperatly urge you not to test a possibly faulty PSU in a working machine.