Discussion Locked

No SCSI Bios Installed on SCSI HDD

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We were using a computer with two Western Digital SCSI2 drives as a CD Server. One drive contained Windows NT 4.0 which the computer boots to. The other drive has no OS. After a storm the computer locked up and during reboot the primary drive began knocking and then gave an error No SCSI Bios Installed! The second drive installs the SCSI Bios with no problem. Is there any way to recover the drive itself? I am afraid because of the noise it is making that perhaps the surge protector failed and the drive is damaged beyond repair. I am not too worried about the contents as I can always reinstall them from the CDs. But I was wondering if the drive could be reformatted and reused? I am new to the SCSI HDDs and I have never reformatted aSCSI drive. I have reformatted many IDE drives though...are they done basically the same way? I appreciate any input.

5 replies

by ntoz

If your drive is making strange noises, replace it. Dont bother with trying to format it, buy a new one, take that one apart and have fun looking at the insides. Its history. Formating a SCSI drive is the same as any other drive with one exception, SCSI has a function called low level formating that can only be done from the SCSI BIOS utiliy. Its exactly that, a low level sector formating. You still have to format it at a OS level as well.

Pete

by dana grantham

Thank you. Just as I figured. The drive is still under warranty so I maybe we can get it replaced. I appreciate your input.

by mckaytech

I agree with Pete that the drive is toast. The knocking indicates a mechanical failure and the failure to initialize properly likely indicates an electrical failure as well. Even if you could breathe life back into it, it would almost certainly bea short-term fix.

paul

by dana grantham

I appreciate your input also. I figured that I would end up having to replace the drive from the beginning but wanted to get some input first. Thanks.

This discussion is closed to new replies.