5 replies
by mjd420nova
by lizah
The pc starts, the fan works..
I just noticed that I have 2 pc's that do not send signals to the monitor.
Pc #1 works, but sometimes when you turn it on it beeps (long non-stop, or a few times)
and Pc #2 does not beep at all, but just starts normally.
Do you think that the video card of both pc's are damaged??
by hal 9000
The Beep sound means something and you need to count the number of Beeps and if they are long or short to get the correct meaning.
The full Error Codes are here
http://www.computerhope.com/beep.htm
There are all the Beep Error Codes listed here for all forms of BIOS and most makes if you have one of the Off the Shelf systems but just knowing the BIOS Brand will generally get you by with what the error code actually means.
If the system is powering up and not making any noise either there is the wrong RAM Fitted if it hasn't worked previously or the Video card has gone bad.
The one making the noise will most likely be telling you that there is something wrong with the RAM most times just removing it and refitting it will cure your problem.
Col
by iak_ivan
Generally first check the pins on the moniter db-hd 15 male connector, what I have seen the monitor will on work or communicate only if all the pin in the connector at intact and have not been broken?
somehow if everything is allright! The other part of the problem seem to be a bad vga card.
by lodrve
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending