22 replies
by sgt_shultz
could this be it?
from support.microsoft.com kb article 227805
Speakers Do Not Work Correctly After Upgrading to Windows 2000
SYMPTOMS
When you upgrade your computer from Microsoft Windows 98 to Windows 2000, your speakers may not work correctly.
CAUSE
This issue can occur if you use a speaker selection other than Desktop Stereo Speakers in the "Sounds and Multimedia" tool.
Windows 2000 Setup configures the "Sounds and Multimedia" tool to use Desktop Stereo Speakers, which is the default speaker selection.
RESOLUTION
To resolve this issue, manually configure the speaker configuration in the "Sounds and Multimedia" tool:
Click Start, point to Settings, and then click Control Panel.
Double-click Sounds and Multimedia.
On the Audio tab, click Advanced under Sound Playback.
In the Speaker Setup box, click the speakers you want to use, and then click OK.
Click OK, and then close Control Panel.
by sgt_shultz
by fathom
by cg it
by fathom
I manually browsed the CD to the drivers folder and picked the appropriate OS Win2k. Nothing...still has a conflict, still no sound.
by parvus1202
by fathom
I already downloaded and installed the latest and greatest drivers for the motherboard. It didn't seem to change anything.
by cg it
hummm sounds like a no suggestions will work case.
PnP, though not well though of, usually does a good job in installing and configuring devices and assigning IRQs. I consider IRQ conflicts in W2K/XP systems rare and usually pop up when a user mucks around with device IRQ assignments.
Maybe TheChas might help ya out.
Good Luck
by cg it
by fathom
by cg it
by thechas
It sounds like you have a partial load of a bad driver.
Remove ALL multi-media devices from Device Manager.
CAUTION, the next step involves editing the registry.
It is "best" practice to back up the registry before proceeding.
Run regedit.
Browse to the hardware enum key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum
Examine the individual keys, and delete those that relate to the sound devices.
Search the registry for "key" terms found in the sound device keys. Delete keys as appropriate.
Shut down the PC.
Install or enable the sound device of choice.
When you boot up, click cancel when Windows attempts to install the sound device.
Run the setup software for the sound device.
On occasion, I have had to wipe the hard drive and start over to recover from a bad driver installation.
Chas
by fathom
Same result
by rcom
After you install windows you need to run the installation of drivers from the CD provided with the motherboard. Don't worry about what's in device manager until after you've ran the CD. When you run the CD it expands the drivers then the devices will be found and correctly installed. So without running the software the drivers will not be found when windows searches for them. Take out any extra cards until you get all on the motherboard working first.
Run the CDROM if it doesn't autostart open My computer or explorer and reun it from there. Select utilities from the menu and install the drivers in the order listed.
1. Intel Chipset Driver
2. Intel USB 2.0 Driver
3. Realtek Audio Driver
4. Realtek LAN Driver
by fathom
I did that....still nothing.
by etoile
by fathom
It has nothing to do with the speakers. I can't even add the tray Icon for sound. It's ghost out in "Sounds and Multimedia Properties". I'm sure it has something to do with the "unknown device" under "sound, video and game controllers". I try to manually install drivers for it from the audio driver directory to no avail. The upgrade device driver wizard is searching for "Microsoft Kernel System Renderer" when I do this. Microsoft has no solution for this. I have run into this problem a couple times before on other systems and never could fix it.
by rcom
OK, let's do this.
You may have done some or all of these steps but maybe not in the correct sequence or something so please read the whole process.
Remove or disable the sound card and modem. Check to see if there's a windows uninstaller in add remove programs. If so uninstall the software for it.
After rebooting make sure the devices are gone. If not there may be a jumper on the mother board to disable the features. After that remove all the multimedia functions using add remove programs, windows setup.
Boot to safe mode and again delete all the sound entries in device manager. Some of the things that you've uninstalled may still be there. Now you shouldn't have anything to do with sound installed on the system at all. When you reboot the sound section in device manager should be gone.
Now go back and re-enable the onboard sound (only). When windows starts and finds the sound card it shouldn't automatically find the driver unless it's included with windows. When it asks you for a path point to the wrong place so that it comes up as an unrecognized sound device. Now you should have unknown sound in device manager. Run the sound install from the motherboard CD. Once this completes go to the next step. Which is updating the system. Especially Direct X. If alls good move on to the modem.
If there's still issues get a bit tougher. Disable com ports, USB and NIC.
by fathom
After installing Windows XP there was sound!
by fathom
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending