4 replies
by thechas
Mechanical problems with hard drives are either design or production run related.
If the 3rd drive is the exact same model, it could have been from the same production run of drives, and the entire run may have a manufacturing defect.
Any unusual noise from ANY hard drive is cause for concern.
The PowerMax tests only check the performance of the drive. They do not check the mechanics of the drive for impending failure.
I suggest that you contact Maxtor again.
See if they have analyzed your old drives.
Then ask if the noise that you are hearing is indicative of a problem.
Next, I suggest that you check the air flow in your case.
You may want / need to install additional air intake fans to help keep the hard drives cool.
Chas
by cabal1208
I don't think this will fix it but here goes.
It may be a problem with the screws if they are not tight enough when a program needs to read something on the disk that is in difrent places it turn at a high speed and it shakes and makes the nose. A dos may not support the high speed so it doesnt shake.
hope it helps
by crivet
by borginva
Am I understanding you are having this problem even with swap out drives? Okay, some possibilites:
1 - The type of drives they are giving you are faulty. If theya re the same exact brand and type, then they could be faulty. Try a diff type.
2 - It is not the drive at all!!!!! Could be the cables or the motherboard itself sending some bad signals to the HD.
I say, since you swapped the drive more than once and talked to a tech, I would return the machine for a working replacement. Hopefully you have some sort of warrenty with them.
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending