Discussion Locked

NT Workstation Display Problem

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
NT 4.0 Workstation installed with Viewsonic monitor. Changed to AST monitor - now booting to normal mode leaves display unreadable. I can boot to VGA mode just fine. BTW, monitor works fine with NT server and displays 65,000 colors. What do I need to do to get the NTW to boot with normal display settings?

5 replies

by tluong

Try to reinstall the service pack. Maybe the drive might not updated. The serivce pack will automatic update the drive for the monitor

by wyldchilde

You might try to update your video card drivers. If you had anti-virus software or a program like pc anywhere 8.0 (shows up as aw_host in devices) installed when you tried to load the drivers, you might disable those and try reloading the drivers.You might also update your monitor drivers from the manufacturer or re-apply the service pack.

by iscmro1

Finding the right video drivers works - as well it should. Took a lot of hunting to find the diamondmm ftp site to find the latest drivers for the Speedstar A50 AGP card. Thanks for the help.

This discussion is closed to new replies.