Discussion Locked

NTFS4 drive into an NTFS 5 pc.

0 helpful
15 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

We put a WinNT drive with NTFS4 partitions into an Win2000 pc that already had a drive running NTFS5. Now we can't see any of the data that was on the NT4 drive. Does Win2000
do something to hard drives that have NT4 loaded on them when it boots upto convert them over to NT5. When I try to view the data on the drive it says "drive not accessible" and "the file or directory is corrupted and unreadable". Any Ideas on what we can do to get the data off the drive?

15 replies

by queen1

Was this drive formally in a client machine?and now in a domain controler? You would have to upgrade it. Just a thought I'll be watching to see if you solve this Good luck

by jwilczyn

To get the data off the drive you have to put this HD back to your PC (with NT) and apply SP4 or higher; then you can install this HD in Win2000 PC.
Up to SP3 - NTFS is rev4; SP4 and above is NTFS rev5. Win2000 won't recognize NTFS rev4.

by jwilczyn

Have you tried to put this HD into W2000 box again? I?m afraid you have a lot of files, which are corrupted. Try to put HD into W2000 box, go to the Disk Management and "Import Foreign Disk". I hope you will be able to recover some of your data.

by ssegro

I put the drive back into a NT4 machine and loaded SP6a and I still can't see anything on the dive. When I run chkdsk it tells me the file system is NTFS, it then says the NTFS volume was created or modified by a later version of NT and that I must boot to that version of NT and run chkdsk and when I do that it just tells me the disk is corrupt.
Does anyone know of any software that can help get the files off this drive?

by dpalsen

A utility like Partition Magic might work wonders for this. You may be able to just convert the drive to a FAT, or some such. Then you can stick it in a Windows mach and pull the data that way.

by jimjennings

A data recover service may be able to retrieve your data, but at a considerable cost. What type of drive is it? (IDE, SCSSI). When was the last time you backed it up? Are you using W2KPro or Server?

This discussion is closed to new replies.