4 replies
by antuck
by dmiles
Check the motherboard manual if available,it will show how to disable the onboard video
Boot computer and press designated key to enter bios,check the column for Advanced or any configuration setting where you locate the video setting,highlight on the video by right-clicking ,this should give you a menu to choose able or disable video.
by keith hailey
you can try Windows update. it may have newer drivers for the onboard video. It's a long shot, but it had an update for my Dell's IBM chipset and before I installed it, I checked it out and sure enough, It was an update from IBM and it worked great. It's worth a shot. At least your PCI card works and you aren't computing "Blind" from memory(I had to do that once, years ago)
you can try Driversguide.com, too.
Good Luck
by keith hailey
you can try Windows update. it may have newer drivers for the onboard video. It's a long shot, but it had an update for my Dell's IBM chipset and before I installed it, I checked it out and sure enough, It was an update from IBM and it worked great. It's worth a shot. At least your PCI card works and you aren't computing "Blind" from memory(I had to do that once, years ago)
you can try Driversguide.com, too.
Good Luck
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending