10 replies
by zlitocook
by jailbreak_pt
Hi
Good luck man :)
by wlbowers
by otl
by zlitocook
When you say that the computer is running dos I expect that you mean MS-DOS. If that is true then you can use an old file transfer package known as Kermit from Columbia University.
http://www.columbia.edu/kermit/mskorder.html
You can download a copy of it onto another machine. Unzip it. Copy it to a floppy disk. Then use that floppy disk to run Kermit on the old computer. Since you are not adding software to the hard disk you are technically not changing the old computer.
You can bring one of the new computers in next to the old computer and connect serial ports via a null modem cable. Run Kermit on both machines. Put hte one on the old machine into server mode. Control the Kermit software on the new computer using Kermit in interactive mode. The old computer can probably still keep doing its normal function while you run Kermit so there may be no down time from the users' viewpoint.
The only question is whether the old machine will get new data while you are setting up the new machine. If the data on the old machine is static or updated infrequently, such as quarterly, then you have a window to get the new machine running without loss of data. Otherwise you might need to do this over a weekend. Kermit is slow but it will work on old MS-DOS machines and on new machines. There are many implementations of Kermit. All are available from Columbia University. Kermit has error detection and correction so you can be sure that the data is correct once it gets to the destination.
hi,
I'm glad that this sounds feasible. Please rate the answers. More than one answer can be accepted so you don't have to wait for more answers before rating them.
thanks
by zlitocook
Poster rated this answer.
by zlitocook
by zlitocook
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending