Discussion Locked

Outlook Express thru a broadband connection

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Dear all,

Our computers used to downloads pop3 mails in outlook express thru a proxy server connected to Internet. The moment we changed our Internet connection to a broadband 256kb connection thru a router, all of them are giving us the following error. I checked out that port 25 is working with no problem. please help.

the error message is as follows:

The connection to the server has failed. Account: 'email.care.org', Server: 'email.care.org', Protocol: POP3, Port: 110, Secure(SSL): No, Socket Error: 10060, Error Number: 0x800CCC0E

3 replies

by sgt_shultz

i believe this is because your public ip address of your router (which is your email server has changed). what ip address is returned when you ping email.care.org
does it return a public ip address? the correct one? ping the ip address it returns.
then telnet port 25 to see if mail server is up ready to serve you on that port.
start/run/cmd
telnet (ip address of email.care.org) 25
eg. telnet 195.168.0.5 25
if you have the correct ip address for the email server and it is responding to ping and most importantly responding to telnet on port 25 then you must have a firewll problem somehwere. remember xp's built in firewall on the client. your new router may have built in firewall that you need to turn completely off for a test.
if the problem is the proxy server is not up to date with new ip address maybe you can fix it for a test using a hosts file on the client.
that is imho most likely thing to happeen but would it produce a 'no socket' error?
i dunno
get telnet ipaddress 25 responding with "Exchange server version whatever" as the first step

by biftuk

Thanks a lot for your help.
I tried to ping email.care.org but with no success. it gives me the right ip address but i cannot ping it. I will check the configuration of the router with our ISP. the thing is the ISP has disallowed us configuring the router.

This discussion is closed to new replies.