Discussion Locked

PC Reboots on startup

0 helpful
18 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a PC with windows me, it has recently started to reboot whenever windows starts, I ran a few checks and I thought it was the hard drive, so I have replaced it with a Maxtor 80gb, the bios seemed to pick this up ok, I tried to reinstall windows me and I still receive the problem, I have even tried installing the following operating systems windows 98/2000/xp pro all of them reboot either as soon as windows starts or just before on the splash screen. My pc is currently running a 800mhz P4 proc, with 128md ram and a 32mb graphics card, it has a 200w power supply, as I said it has run with no problems for the last 5 years and apart from the hard drive there have been no other hardware changes, can anyone help?

18 replies

by rindi1

This could be a heat problem. check if the fans are all running properly, particularly those at the cpu. Clean off all dust. If you can remove the cooler from the cpu, it might help to add some heat transfer paste to the cpu.

by paul.ebay

I have cleaned the fan, this time it firtstly crashed with a windows protection error, now it just crashes and i cant do anything, anymore suggestions?

by sgt_shultz

can you try another keyboard and mouse. 200w ps not very big.
what is installed now? stick with winme/9x so we don't worry you need a bios flash to be compatible with os. can you boot in safe mode. can you stay up with winme or 98 boot floppy. can you get into bios setup and stay up. have you watched boot screen very carefully to see what is getting checked last before reboot.

by sgt_shultz

well sorry no joy. windows installs and runs ok for a while then reboots then scandisk /f fixes untio next reboot? i think you have funky hd controller maybe or weird settings. load bios defaults. enable large drive access in bios. post if confusting. include bios version. start completely fresh with fdisk and new partiton? make it few mb less than drive capacty? if still noy joy try $20 promise hd controller

by sgt_shultz

don't forget windows updates immediately as soon as you can get that far. some updates included large ide drive fixes

by sgt_shultz

don't forget windows updates immediately as soon as you can get that far. some updates included large ide drive fixes

by paul.ebay

The pc does exactly the same in safe mode, when it does restart it asks me to run a scandisk, if i let it run it will run through fine and then restart when it tries to load the rest of windows, if i cancel scandisk it will then restart when trying to load windows, i can open up the bios and stay in there as long as i want without any problems, i have also tried changing the mouse and keyboard all end up with the same result, i have even tried changing the graphics card, memory and unplugging all devices but i still receive the same problem. it currently has me on which as i have said has worked for 5 years with no problems, any more suggeastions?

by paul.ebay

i have ran the scandisk and that came back with no errors, i have even tried putting in a smaller hard drive (10gb) and it still crashes, is there anything else that could be causing this kind of error?

by aquias20009

By the sounds of it, you've eliminated the OS. You've also eliminated several pieces of hardware as being the culprit.

I'd have to agree with the above answer to start with, check out your HD controller. This, my guess at least, is a hardware issue.

If the hd controller doesn't fix the problem I'd say one of two things has happened here. The motherboard took some kind of hit and it's only displaying this behaviour when Windows is loading. Or, it's possible you've got a BIOS virus.

I'd see if I could get my hands on something to check out the BIOS for any bugs.

by paul.ebay

Any suggestions for software to check my bios?, also what kind of checks can i run on my HD controller?

by statykserver

If you the following spare parts ...great (if not maybe a friend can let you borrow his to test or purchase and return the ones you don't need). 1.Power supply 2. memory

The memory stick will be the easiest to change out and test so do that one first. (same speed and type) Swap it out with a memory module from a known working computer. Test it out for a while and see what results you get.
If you are still having the problem then it would seem that it is your power supply.
Switch out the power supply with another one (you might have to purchase it)
I have seen where failing power supplies cause different kinds of problems and errors making it all the more difficult to troubleshoot. (Maybe when windows is loading the power management causes the problem and the system restarts or drivers are causing hardware to run and consume power differently possibly overloading the powersupply just enought to cause it to reboot.

by statykserver

Switch out the power supply, I just saw that you already switched out memory. So it seems the only thing left to do is the power supply.

by techierob

It might be a problem with the motherboard. Upon reading everyones imput, it seems that all the other hardware components are functioning. I had a problem similar to this once but with windows XP. It turned out that the system fan was not running and it ended up frying 3 cap's on the motherboard. Check your CPU for a "bubble" and also check that your mobo has no broken links or blown capacitors. Easiest way to check for broken links is to remove the motherboard and look at the bottom of it.

In taking it out also, check that it is not shorting against the case. A rouge case screw is the main culprit that can cause this.

My hunch is power / the motherboard itself.

by sømand

I think that "statykserver" are right, it could be your ram card. Try to unplug one and see, if your pc can run. Your pc should be able to run with only one card.

benny

by rcom

Disconnect all devices from the PC. If you have USB keys & mouse get regular PS/2 type. So the only thing that should be connected is the keys & mouse.

Remove all extra cards like modems and nics Only have the video card installed. If its still intact re-install your original drive. Disconnect CD drives but hard drive and floppy. Reseat all the power and ribbon cables for the drives. See if it boots. If so start putting things back one by one till the problem occurs.

Something is using too much current so this seems to be related to the 200W (weak) power supply. That's easy to change and not expensive. Infact this may be a good time to pick up a newer case since your saying this system is 5 years old.

by walkerxp92

I would check your processor temp, when you boot go into the bios setup and find in the menus where it tells you your processor temp. I would look at this and leave it on for a while and see if the processor temp gets too high. Too hot is 160 degrees and up... usually you want to run under atleast 130 wich is a little high but safe.

by paul.ebay

I have tried changing the power supply to a 350w and i still get the error, does anyone have any other suggestions?

This discussion is closed to new replies.