Discussion Locked

pc running win98se will not powerdown

0 helpful
17 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a pc running windows 98 and when i do start and shutdown it gets to the point where it says it's safe to turn off your pc. my pc is a compaq dekpro ep with a PIII 450mhz. Can someone help me. Thank you.

17 replies

by tbradley

That's normal, and a lot of people prefer it that way, but if you want your computer to power off by itself, you will need to modify your BIOS settings to turn on Power Management Features.

Also, in windows, control panel, power management, go to advanced and change the power button setting to shutdown

by scm

I think in addition to tbradley's suggestions, you would also have to check to see if you have the correct power supply type. Normally, there are two types used in PC's, AT and ATX. The ATX power supply units allow the operating system to shut down the computer, the AT units do not, they just get you to the screen where it says it's safe to turn off your PC.

If you still have the spec sheet that Compaq would have included with your computer (e.g., a mainboard manual), it should be able to tell you if you have the AT or ATX power supply. If you don't have the manual, but you do have those options in your BIOS to to change the power management settings, then that's a good sign that you have the ATX. If you have the ATX power supply,but not the options in the BIOS, then you'd probably have to look into upgrading your BIOS.

SCM

by phascnh

soulrider has it right they have posted many a fix for this one go to the site and get the fix.

by guna_05

This maybe becouse of some inportant files missing in ur system if you are using win98 u can try to download and install 'windows98se Shutdown patch' where u can get it from downloads.com/microsoft.com.
This will help to replase some missing files in the system.

by c_kuijpers

There are indeed several possibility,s for not shutting down. To disable wake on modem and wake on lan in the bios ca also fix this problem.

by jim

You may also want to check in your device manager for duplicate Power Management Devices (Under system devices). If you have duplicates delete them both then restart. Your computer will redetect the correct device and should shut down properly.

This discussion is closed to new replies.