Discussion Locked

PC Speaker Not Workin

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,
I Have WindowNT 4.0 service pack 6.0 installed on my machine.I have Yamaha Soundcard.Now the Problem is iam not able to get any music thru my onboard speaker.But iam able to play DOS mode music thru the same speaker ,Iam also getting the outputfrom the sound card thru the external output of the soundcard but not thru speaker,I have checked for the audio wire connected from cd-rom to motherboard.
I Havent got a clue why it wudnt play music from windows.

9 replies

by >@ >@ gone fishing @< @<

ONBOARD SPEAKER ? do you mean a onboard sound card or the little standard speaker, or a pair of case mounted speakers..
A: Check your Volume settings and make sure that none of the inputs are muted or disabled. Double click on the yellow speaker you will see a range of volume controls, by default not all controls are displayed and you may need to goto the file menu and select properties to add the different controls.

Re the Aidio cable from CDROM, make sure it is connected to the right input, many soundcards can have 2 or 3 input jacks.

You say you are running a yamaha sound card, is this onboard or is this extra to the onaboard sound ??

When you say dos mode music are you refering to games or playing sample files in dos >????

by softech

If I understand you correctly, you are talking about the standard PC speaker that is inside your computer. If that's the case, your sound card should have a two-pin or four-pin connection that will accept the PC speaker as an input. Unplug the PC speaker from the motherboard and attach it to this connection. Then all system sounds, such as the memory count and power-on beep should come through your PC speaker. Sound files, CD tracks, etc., will come through your soundcard speakers.

by sean-machado

If I am understanding what you are saying, the tiny speaker mounted in your case does not play sounds except for "BEEPS" from DOS.

Basically that speaker is NOT MEANT to work that way...the speaker in a PC (mounted to the case) is there for diagnostic purposes in case the PC cannot boot, the tech can sometimes diagnose from the number and length of tones. In the past, some people have programmed the speaker to play simple songs and the like, but you really need a seperate set of speakers that plug to the soundcard...

by cuban_titanic

In the ZDNet web page you can find a driver called pcspeaker.drv (I'm not sure) that allows you to use the internal speaker even if you don't have any sound card. Check it out.

This discussion is closed to new replies.