Discussion Locked

pcAnywhere

0 helpful

6 replies

by lallen01 Aug 27, 2000 last reply Aug 9, 2001 1 view

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Running pcA 9.0 - Host and Remote are set up and connect fine. Running a database application (Megawest (medical program) through a Sisco Router (LAN). Remote connects fine to Host and can bring up the Megawest on the host which in turn connects through the LAN to the Megawest - and do everything except print reports from Megawest to the remote which is a modem a dial-up!

6 replies

by lallen01 Aug 27, 2000

Correction: The version is 9.2 not 9.0.

Thanks

by bill cassada Aug 27, 2000

The reports will not print over the dial-up connection to the remote machine because the remote is acting as the host. In order to print over the dial-up connection you will need to set up the print services to enable this feature. The remote should be able to print reports to any available printer on the LAN for which it has appropriate permissions. How is your dial-up set up? Are you using the same IP scheme as the LAN? If not this is where to start, then move on to print services.