1. Place a second NIC card in the HOST computer (preferrably one of different make and model than the Modem NIC card yet configured the same as all other Workstation cards in the network).
2. a) Make sure that you are using Microsoft Client Login, NETBEUI and TCP/IP protocols on this card as well as all other workstation NIC cards. b) Select File and Printer Sharing. c) DO NOT ALTER IN ANY WAY the pre-existing Modem NIC card settings of the HOST computer. These settings are mapped by the ISP and your modem will only recognize that card at that mac address. But for testing purposes you will need to assign a subnet mask of 255.255.255.0 to all other NIC cards in the network. d) Assign a NETWORK GROUP NAME that will be used to designate your Network and then chose a COMPUTER NAME for every computer within the network.
3. Using a CROSSOVER CABLE connect this new network card from the HOST into preferably an 8 point HUB.
4. Using PATCH CABLE connect all other WORKSTATIONS into the HUB via their NIC cards.
4. Reboot the Host computer and all other workstations. Now you will see a login screen. You must enter the correct password here or the network will not function. Hitting the cancel or ESC buttons will get you to the desktop but will nullify the Network connection. This being done click on the Network Neighborhood icon of the HOST computer. Here you should see each of the Workstations. If you do not see them immediately click on the Entire Network icon.
5. Only after having established that you now have a working network can you then move on to giving each station access to the Modem. This will be done by using ICS or Internet Connection Sharing. On the HOST ONLY go to Control Panel > Add/Remove Programs >Windows Setup > Internet Tools > Internet Connection Sharing. Follow the Wizard here and you will do fine.