Discussion Locked

Phantom Floppy Drive

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a PC which displays floppy drives A and B
The A drive does not exist and I have been unable to remove this phantom device (or the Icon for it) from my system. I have attempted to do this from Device Manager and BIOS but the device does not appear on the relevant setup screen.

3 replies

by thechas

I would start by double checking how your "B" floppy drive is cabled into the system.
If the cable has a twist in the wires between the drive connector, and the motherboard, your drive is wired as the "A" drive.

If the drive is indeed wired as the "B" drive, check that the BIOS setting to swap floppy drives is not set to enable.

I have seen a couple of BIOSes that assume that you will only have one floppy, and it will be the "A" drive. If you do not have the option to select an "A" drive, this may be the problem.

Another possability, is that the system originally had an LS-120 drive as the "A" drive, and it is still listed in the hard drive section of the BIOS settings.

As a potential work around;
Set the BIOS switch for reporting floppy drives to windows to disable.
Under the performance tab of system properties, in file system, you may have a tab for floppy drives. Set the option to not search for new floppy drives.
That way, when you remove the floopy, it should stay removed.

This discussion is closed to new replies.