Discussion Locked

PLUG AND PLAY ERROR

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Why do i get a plug and play error when installing an Intel v.90 modem with a Dell GX150 pc?

5 replies

by robert young

Whuch OS are you running? It would help us all greatly if you could supply some more details in the question.

Regards

by csbr

Mmmm a Dell GX150... some old system with win 98 i think?

anway, try to "force" the available interrupts to the cards. go to device manager and switch some stuff off the p&p.

Also in safe-mode delete the interrupt-place holders.
it will forcewindows when in normal mode again to re-assign some interrupts to the cards available.

sometimes you have to make things worse in order to get a system working again;:-))

by drose

Os is windows98. When i remove the modem and drivers no problem. Once I reinstal the modem and boot up I immediately get a plug and play error, and it tells me to hit F1 to continue. I can get past it by hitting F1 and the modem will work, but the error has me stumped.

This discussion is closed to new replies.