Desktop

Ask something
Discussion Locked

Printer Problem

0 helpful
3 replies

by ge0rgei

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

i have a hp laserjet 2550Ln and i just replaced the Drum and the toners but when i print it fades half the page (the left side of the page)any suggestions on what the problem is and how i can fix it (dont have tech support from Hp or anything)
you alls help would be grate!.. :)
thansk
ge0rgei

3 replies

by cmiller5400

Hmmm this one sounds interesting. It could be the laser/scanner or less likely a fuser (this would most likely cause ghosting, repetition of images every 2 inches or so) You want to talk to HP as said earlier, if it is the laser/scanner this is not a cheap or easy fix over $310usd just for the part. If it is the fuser, it will set you back about $250usd.

by dnevill

Is there a lot of loose toner in the machine? Loose toner can block the ground connectors causing imageing problems. I also had a dirty laser mirror on a black and white printer once that caused poor image quality.

This discussion is closed to new replies.