Discussion Locked

problems with my Viewsonic LCD monitor

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Everytime I turn on my computer, the screen either flickers or scrolls really fast (I really can't tell what it's doing). This keeps on going until the Windows desktop is loaded and then I can use the computer with no problems. I'm guessing this has something to do with the native resolution of the monitor, but is there any way to fix it? Any time a program tries to change the Windows display resolution the same thing happens and it's really hard to change it back.

I've tried crt monitorsand they work fine, so I'm pretty sure its not the video card. I'm not interested in being able to change the Windows resolution, I'd just like to be able to see a legible boot and BIOS display.

I'm running WinME with a GeForce2 video card.

5 replies

by ann777

I suggest you try this LCD display on another computer.... you may have a bad unit.

See if it has horizontal adjustment buttons. On some regular monitors there are hidden adjustment tools for this type of thing (for instance, some models of NEC monitors have a hole for a long screwdriver on the right or left side). Check your manual.

by bschilling

LCD monitors are more sensitive to having the right video driver and display settings(refresh rate and resolution) than most CRT monitors. Check the CD that came with the monitor or go to the company's web site. You may need a DOS driver to see the pre-windows display. And, if the LCD display vendor has a newer driver, give it a try.
I have a similar problem on an InFocus LCD projector. It displays beautiful Windows video. But displaying a DOS screen results in lots of tear and flicker. InFocus solved the problem with an expensive little hardware add-on. You might be luckier

by estvb

I turned out to be a defective monitor and I'm sending it back. I accepted both answers because the suggestions were the same things the tech support person had me try.

Thanks for the help

This discussion is closed to new replies.