Discussion Locked

Protected by GoBack

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I switched a hard drive with GoBack on it to a new motherboard. The GoBack freezes and I can't start in safemode. The message states Press SPACEBAR to repair problems or see other boot options. Please wait and it freezes. How can I bypass GoBack and get this hard drive running properly?

6 replies

by softcorp.us

Hello...

Even if you can resolve the problem with GoBack, you're going to have a problem with Windows. You cannot move a Windows installation from one motherboard to another. Windows installs hardware-specific code on the hard drive.

I suggest you do the following:

1. If you don't already have one, create a current backup of your data. You can do this by reinstalling the old motherboard. Or, you can do this by creating a new boot partition on another drive and then backup the current one.

2. Use a bootable Windows CD to reinstall Windows over the existing one on the hard drive.

-----Steve Jackson

CEO/CSA
Software Corporation (Softcorp)
http://www.softcorp.us/probono
Advanced pro bono tools and utilities free for personal use

by softcorp.us

Since you're new: Be sure to rate the answers you get on TR and close your question when you're done.

by shama6568

I had to switch to another motherboard because the CPU broke and the new one is too big to fit into the old machine. I tried to reconnect the hard drive to the old motherboard but it didn't work. It starts but it freezes at the GoBack screen. I've tried pressing F8 and ctrl button but no safemode.

by bhunsinger

Replace the old Motherboard and disable/turn off GoBack. Then If you are using W98, that should solve the problem. Otherwise you could install your os on a different HD and copy the files after slaving the old HD to your system

This discussion is closed to new replies.