do not plug a power strip into a power strip and expect multiple laser printers, a fridge, multiple systems/monitors, and still have power for boiling tea water
to keep from reaching, cords should not go from the floor to the front of the desk tabletop to plug into equipment. Hanging cords being 'snagged' by movement, may cause notebook computers to tumble floowards
tugging on cables because 'you think' you grabbed the right one (when they are tied together under the desk) is not a good idea. If it gives resistance, there is a reason for it. tugging harder just 'creates' problems.
Snipping a cable because it is tangled up, and not finding where it is plugged in to is a bad idea. Heck, just snipping the cable is a bad idea. Letting it sit and hang around is a worse idea, especially if it has power.
putting a shelf anright above the computer/monitor. Loading it down with stuff that weighs too much for the shelf. Keep adding items until the shelf finally breaks.
:^0 :^0 :^0
I have been a witness to these events and more