Question Locked

Ram not working properly

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have put some 1gb of RAM into my computer which i have just built, but it shows up as 32mb and when i put it in a differnt bank it still shows up as 32mb so it is that stick. Can anyone explain why 1gb shows up as 32mb? Thnaks.

6 replies

by hal 9000

Or you could have the wrong type of RAM for that M'Board.

Without knowing more about the Make & Model of the M'Board & Ram it's impossible to say but are you looking at what Windows sees or what is seen in BIOS as what RAM is actually available?

Col

by thechas

As HAL stated, it is possible that the RAM module is bad.

It is also possible that the RAM module is not compatible with the motherboard you have.

I have come across more different RAM compatibility issues than I can list in this forum.

The older the motherboard, and the newer the RAM, the more apt you are to run into compatibility issues.

Chas

by hal 9000

[i]DDR
Memory Speed PC2700/PC2100/PC1600
Memory Sockets Two DIMMs
Maximum Memory Two GB[/i]

So the M'Board can take up to 2 X 1 GIG RAM Sticks of DDR PC2700/PC2100/PC1600 RAM so the obvious question is what is the RAM that you actually have?

If you have the right Spec RAM it's either substandard RAM and not being read correctly or it's faulty and suffered some damage which may not be obvious.

Col

by jon.bond

Did you ever discover what the issue was here? I have the same problem now.

This discussion is closed to new replies.