Question Locked

Recommend a motherboard for data recovery

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
What is the best motherboard to use when building a computer for data recovery jobs? I am using Ontrack Professional and would like build a new computer that will be dedicated to data recovery jobs in a mid-sized company.

2 replies

by hal 9000

As this will be a specialised machine I would say use an Intel Dual Core CPU and a suitable M'Board from ABIT, ASUS or someone like them and load it up with as much memory as possible and the fastest CPU that you can get your hands on.

I also don't use [b]All In One M'Boards[/b] for this job as the GPU is stolen from the CPU and System RAM and this causes the system to be much slower than it needs to be so I always have a separate Video Card and just disable in BIOS any on board Sound. You don't need a high end Video Card any will do but as even the 128 MEG PCI XPress are cheap now they are quite usable though a bit of over kill. But are generally the smallest that you can buy at a reasonable price.

You'll then want some means of connecting both the drive that you want to recover the data from and the drive that you'll be writing it to unless of course you are only looking at rebuilding MBR's of corrupted HDD's.

I tend to use a combination of internal removable caddies connected to a separate PCI to IDE Card and USB Caddies for the HDD's that I'm recovering data from so that they remain separate from the main computer and don't have any affect on it. Sometimes you'll get a drive that will stop the system from booting even if it's set to Slave on a different IDE Channel so when this happens I use an external USB Caddy and run them from there and they have worked so far for me. Though they are considerably slower that being connected directly to the computers M'Board they still work. I haven't tried using Fire wire External Caddies mainly because till recently I couldn't buy any but there are now a few available on the market so it might be worth while looking at these as they have a much higher data transfer speed than USB 2 is capable of producing.

Though as I haven't used one yet I'm not sure just how well they work.

Col

This discussion is closed to new replies.