3 replies
by thechas
The first step is to have a quality sound card.
If you are looking for decent fidelity on your recordings do NOT attempt to record from albums if your PC has on-board sound.
It's getting out of date, but check out the sound card ratings on this site:
http://www.pcavtech.com/soundcards/index.htm
Next, the better the quality of the cassette deck or turntable, the better the results will be.
As to software, most CD-Burning applications come with a basic recorder.
There are many packages that you can use to improve on the overall sound quality and remove noise from the recording.
Here are some links:
http://www.cfbsoftware.com/default.htm
http://www.garage-a-records.com/index.php
This next one is a tutorial on recording!
http://www.delback.co.uk/lp-cdr.htm
http://biphome.spray.se/baxtrom/soliton.htm
As far as connecting cables, with a standard sound card, you need a stereo RCA to mini-plug cable.
Plug the left and right channel RCA plugs into the tape or line out jacks on the stereo source.
Plug the mini-plug into the Line In jack on the sound card.
What software and hardware you use will have an impact on the recording.
If you have a lot of valuable recordings that are in good shape, it may make sense to invest in a decent turntable and cartridge for this project.
Chas
by jdamico
Thanks so much! I also found a website that had good instructions, help2go.com.
by jdamico
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending