Question Locked

Recovery Problem

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a Gateway 7330GZ series notebook. I purchased the recovery disks from gateway and tried to use them. It gets about half way throw the installing devices and freezes. Does anyone know how to deal with this problem?

5 replies

by oh smeg

For that Model Gateway NB.

Look for surface damage on the Install Media or marks. It's possible that the Data Surface of the Recovery Disc's is marked and needs cleaning or they could be scratched or have a manufacturing fault and need replacing. I ran across this problem last week with a New DVD and while it was a Movie as the same processes are used in making the Recovery CD's it's possible that this could happen.

If none of that works I would suggest that you contact Gateway for a possible solution but I honestly think that they will have the same idea that there is a Problem with at least 1 of the Recovery Disc's.

Col

by toronto_downtown

Hey, I just bought a used one from someone with the same problem... I'm wondering if you figured it out yet? I'm thinking it's the hidden system partition on the drive should be removed before attempting to use the recovery discs. Please let me know :) Thanks, Brad

toronto_downtown@hotmail.com

by centerlineads

The problem with mine, is a virus attacked the CMOS on the motherboard. The Speeddisk can not be disabled to reload the Gateway Recovery Disc properly. This causes the computer to lock up when restarted. It starts to load Windows and then stops. Nothing I can do without a technical guide showing how to open the laptop body and remove the clock/CMOS battery. If I could remove it, I could reset the CMOS and then do the reload. I really don't want to spend money to fix this problem and did not think I should be, but without know the proper way to open up the casing and accessing the battery and jumpers, I am probably going to have to either send it out for repair or throw the dam thing out the window of my car and do an insurance claim...LOL!

by oh smeg

All modern NB's have the BIOS Chip soldered to the M'Board and a Smart Socket to power it.

So you can not remove or replace the BIOS Chip unless you replace the M'Board. However there may be a way to Clear the BIOS from the BIOS Screen you will need to look at the owners Manual for this though.

Col

This discussion is closed to new replies.