Discussion Locked

Remote VPN connection process details

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I need the sequential details of how a remote VPN session occurs. It would start something like this..1) the laptop dials a local POP (ISP) tele num and is asked for a password, 2)a PPP connection is granted from the ISP to the laptop, 3) the VPN(??) software then ????, etc. etc.. I am looking for details on how the whole connection process goes including, authenticating through a PKI and creating the tunnel including the cryptography. All the back and forth communication until the user has access to the corporate server. Have lots of info/sites already but need the communication/negotiation details to put it all together. Abbrv are okay.

6 replies

by k.o.z.

I'm not sure how much detail you're looking for but you're on the right track. In terms of security you dial your local ISP (AT&T for my company) and use any encryption method that you set with your ISP through Dial-Up-Networking (clear text, CHAP,PAP etc.).

Then you launch your VPN Software which creates your tunnel via PPTP. At this point you can select your own security. We use Secure Token ID's but you can configue your VPN box to accept regular user names and passwords. The software creates the secure tunnel to your network and your VPN box handle the authentication. Once you're validated on your VPN box you have access to the network. Then your local corporate server policies take over and control who gets access to the server. Hope that helps!

by archer.schultz

Thanks for taking the time to reply but it is not exactly what I'm looking for. I want to trace (know) each communication back and forth from the initial call to the isp until the tunnel is created and the user is authenticated. In other words, ifdrawing a diagram, there would be multiple lines going to and coming from the laptop, RAS, and CA. Each line would have a bit of a description eg. request for connection, acknowledgement for connection to pop, etc. In all the docs and white papersI've read, there isn't anything that details it that way. Anyway, thanks for the info. When I get the diagram done I will post it.

by mmccaskill69

Q241251 and Q241252 has the most descriptive information I could find about the process of VPN technology.

by archer.schultz

Thanks for taking the time to reply but it is not exactly what I'm looking for. I want to trace (know) each communication back and forth from the initial call to the isp until the tunnel is created and the user is authenticated. In other words, ifdrawing a diagram, there would be multiple lines going to and coming from the laptop, RAS, and CA. Each line would have a bit of a description eg. request for connection, acknowledgement for connection to pop, etc. In all the docs and white papersI've read, there isn't anything that details it that way. Anyway, thanks for the info. When I get the diagram done I will post it.

by dmiles

1)Open the Dial-Up Networking folder
The Connect to screen will appear
User name and Password
Click Connect to dial out and get connected.
VPN set-up
Open the Dial-Up Networking folder
Choose a name like Virtual Private Network Connection
Select Device-Microsoft VPN Adapter device
Provide Hostname or ISP address
click Finish
ISP provides
IP ADDRESSES AND SUBNET MASK
DNS search order
Gateway address
AUTHENICATION PROCESS
after the configuration is done the process is simple to make connection once you have configured the VPN
Reference>Start>Help,when Windows Help opens type in VPN,AND PRINT OUT CONFIGURATION

by archer.schultz

Thanks for taking the time to reply but it is not exactly what I'm looking for. I want to trace (know) each communication back and forth from the initial call to the isp until the tunnel is created and the user is authenticated. In other words, ifdrawing a diagram, there would be multiple lines going to and coming from the laptop, RAS, and CA. Each line would have a bit of a description eg. request for connection, acknowledgement for connection to pop, etc. In all the docs and white papersI've read, there isn't anything that details it that way. Anyway, thanks for the info. When I get the diagram done I will post it.

This discussion is closed to new replies.