Question Locked

Reverse Pairs on CAT5

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a 30 user LAN/WAN, which is randomly kicking users off, and doing minor "wierd" things, which requires the switches/routers to be reset. After which, the users are fine for a day or two... then it starts all over again.
The building was wired prior to my arrival as IT person. After checking with a cable tester, and getting a "reverse pair" error code, I pulled the patch panels to find that ALL pairs on ALL patch panels are reversed, while the terminated RJ45 are properly wired for CAT5b. Now.. I realize this can/will cause problems on the LAN.
My question is this: Can someone give my a technical definition of WHAT EXACTLY happens to data in this situation ?
Im trying to justify a re-wire to the site owner, and would like some more technical ammo.

Thanks.

4 replies

by sgt_shultz

just tell them the thing is wired wrong. get some wiring diagrams and show them. You already have the symptoms - multiple collisions which finally confuse the equipment to death.
you post is why i hire pros to wire the network, shoot it and hand me the documentation. then I threaten bodily harm to whomever messes with it

by thumbsup2

You may not need to completely rewire the building, if the cable is CAT5.

All you really need to do is repin the ends. That will also give you an opportunity to map the network to make sure what you were given by the previous IT person is accurate.

However, you might be able to justify the expense by telling them they need to upgrade to CAT6 for compatibility with newer equipment. :D

by Former member

Actually, many switches will auto-polarize and auto-connect. Depends on the switch. You don't get this intermittent problem though when they are not polarized correctly, you get no link at all. The best thing to do is if your switches/routers are manageable, log into them and look at the console logs and interfaces.

This discussion is closed to new replies.