Question Locked

scanning over wireless network

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have set up a wireless network and share a HP PhotoSmart 2610 all in one printer. It is connected to the desktop pc by USB, but also connect to the wireless router to share out to the other pcs. When users scan a document over the wireless, they select what computer to scan to on the printer, then click scan on their computer, but the scanner then comes up with a error message "HP imaging device could not initialized". Scans fine to the desktop. I am wondering if i need to open up some ports on the computers connected by wireless.

4 replies

by robo_dev

Or are they on the same physical network and subnet?

You might look into the 'fixscan' utility as it fixes HP scanning problems, as the name would imply.

http://h20000.www2.hp.com

by thechas

If I am reading this HP page:

http://tinyurl.com/4l4dty

correctly, the person scanning should not run the scan from their computer, but should be sending the scan to their computer from the scanner.

The HP software application is only for a computer with a direct connection to the scanner.

Now, you may need to set up folders on each users computer for the scans to be sent to.

Chas

by pgm554

Wireless has way too many issues.

If you plug directly into the network,it probably will work.

Otherwise try a lite scanning version from a web browser using the scanners ip address.

This discussion is closed to new replies.