9 replies
by thechas
Have you installed the chipset / MB drivers?
These should be installed before you attempt to install device drivers.
You may need to clear all SB files and registry references in order to install the driver.
Are you using the original CD, or downloaded updates from Creative?
Some of Creatives files are updates for an installed card, and not complete drivers.
by carrenaus
by cnlson
by carrenaus
by thechas
The chipset / MB drivers are a set of drivers so that W98 can communicate properly with your MotherBoard devices.
Installing the drivers will make a big difference in the performance of AGP cards, the PCI buss, and the IDE controller.
These drivers should be installed before you install any other device drivers.
If you have a disk for the MB, the drivers should be on there.
I would recommend that you check the MB mfg web site for updated drivers, and use them instead of what is on the CD.
Alternatly, if you can identify the chipset on the MB (should be referred to in the manual or web site) you can usually get a newer version of the driver from the chipset mfg.
You likely have either an ALI or VIA chipset, as these are the mostcommon on Super 7 MBs.
by carrenaus
by carrenaus
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending