Discussion Locked

Spooler 32 Error

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a network wide problem. It's called a Spooler32 Error, and you get it when you are printing a lot of documents. It has happened in many different applications such as Word 2000, Outlook 2000, Word Perfect 8, Netsxcape Navigator, Insource ( a CD in the Server CD-ROM drive that is used by the whole network). What happens is that you lose your printers, they disappear, and you have to reboot to get them back. It happens on local and network printers, and it can happen once a month or 5 times in the same day. There is no consistency about this error and it has been frustrating us for months. Please HELP!!!!!
Thanks

6 replies

by steve cody

The Spool32 is the service that controls printing. So, when it crashes, you will definitely lose your printers until the service can be restarted.

You probably have a problem with a particular printer driver. I would go to the printer manufacturer's site and get the latest printer driver. This should clear up your problems.

- Steve

by syscokid

Spool 32 errors can occur for many reasons. Here's some things to try.

1 Spool32.exe may be corrupt. Copy one in from another machine. (You can't do it when Windows is running-have to go to DOS mode).

2. Make sure you have the latest driver for your printer.

3. Do you have a fax or answering machine running in the background? If so, disable it.

4. Here's a site devoted to SPOOL32 errors!
http://www.starkreality.com/~callen/spool32.htm

by stngfan1

I ran into this problem on some units here. The user was low on network disk space. When you print a tempory file was made in the user disk space, if the file was larger than available space, this error would show up. Also make sure the user has room on their local HDD for a swap file.

Good Luck
TM

by dee

WE tried this and found that space was not a problem, because we added to our hard drives and it comes back worse than ever

This discussion is closed to new replies.