5 replies
by asteinberg
Try to check the ip addressing allocation on the affected station. You can go to Network Connections and open the status of your Local Area Connection. Click on the Support tab and then at the Details button. It is equivalent to the ipconfig /all command, but has the GUI and the Repair button right below.
Another way to get diagnostics is to issue the command "netsh diag gui".
With the diagnostics, you'll have information to go to the DHCP server and look for the IP leases.
I see that maybe you have one of two possible problems: IP addressing space exhausted (more concurrent connections than IPs available) or excess collisions on your LAN. The first problem can be corrected directly on DHCP server, the second requires further investigation on you cabling and switches.
by hozcanhan
by 3xp3rt
by jdclyde
Remember, when you subnet, you REQUIRE a ROUTER for the two LANS to talk.
If using a Cisco, if you have two lan ports use one for each. Of not, you can "subinterface" the port.
Make sure you have a decent switch for the core.
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending