8 replies
by bfilmfan
FAT32 if you have Windows 98 and above clients.
NTFS if your clients are Windows 2000 and above.
by bladepact
Poster rated this answer.
If you're going to install Windows 98, you'll need to use FAT32. If it's going to be Windows 2000+, I'd just go ahead and use NTFS. If you're going more legacy than Win 98, you'll need to use FAT 16 - that will cover DOS and every version of windows.
NTFS is, as far as I know, the most efficient file system for a large hard drive - it's quite fast and uses its space very effectively. FAT32 is okay, but starts to have problems at that size. I also believe that FAT 32 is limited to a 32 GB hard drive size in Win98 so you'd have to partition.
by bladepact
Poster rated this answer.
by hal 9000
One of my customers uses something similar over (X and latter versions of Windows and they have a 40 GIG that I've formated to FAT32 and it seems to be working quite OK.
Other than needing to load USB drivers to the 98 computers I haven't heard of any problems although FAT32 isn't the most efficient way to use a HDD in your case it is most likely the only possibility.
If you need Windows 3X [b]DOS[/b] compatibility you'll need to go with a FAT16 Format but I don't thing that it will be capable of using the entire HDD space and I'm not sure that XP or 2003 is capable of reading that format either.
Col
by bladepact
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending