Discussion Locked

system halted error

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

sir!
i have a hard drive which has windows 2000 operating system my system board has been demadge when i attatch the hard drive on other system board error accoured system halted.whats the solution of this problem i m waiting your anserwe
thank you

5 replies

by bfilmfan

What is the exact error message you are seeing?

Most likely there is a difference btween the Hawrdware Abstraction Layer on your old system board and the new one. You can correct that issue with these steps:

1. Turn off the computer.

2. Replace the existing motherboard with the new motherboard.

3. Insert your Windows CD in the CD-ROM drive or the DVD-ROM drive, and start the computer from the CD.

4. Do one of the following:? For Windows 2000:a. When you are prompted To set up Windows 2000 now, press ENTER, press ENTER.

Setup looks for any previous installations of Windows 2000 on the hard disk and then displays a list of any previous installations that it finds.

b. Use the arrow keys to select the installation that you want to repair, and then press R to select the To repair the selected Windows 2000 installation, press R option.

This will start the repair of your previous Windows 2000 installation.

5. Follow the instructions on the screen, and allow Setup to complete the repair of the previous Windows 2000 installation.

Setup installs the HAL, the IDE controller drivers, and any other drivers that the new motherboard must have.

6. After the repair is completed, reinstall any service packs or hotfixes that you had previously installed.

by maniskid

You will need to run the sysprep utility that comes with the windows2000 disk.

This will remove the bindings to the other mainboard and then allow you to install that harddisk to the new mainboard.

Otherwise install another copy of windows2000 on another hard disk and copy your data to that disk. You will need to reinstall your programs.

This discussion is closed to new replies.