Discussion Locked

System Restart

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Dear Sir,
This is my first problem, which i have got in my system, i have tried my level best. So Please Give me the answer for this. well about my system, i am using D865GBF Motherboard, 2.4 Ghz, 768 ram, 40 Gb Hdd & Win Xp operating system. My problem is that my system restarts Whenever he want to, I mean At any time wheather i use it 2,3 or 5 hours, in that time it will restart atleast 1-2 times, I even changed my Motherboard, Processor and as well as ram. But the problem Persists. And this time i recorded the error message which my system gives after restart. Here it is,

BCCode : 10000050 BCP1 : E1E9FFFC BCP2 : 00000001 BCP3 : BF873317
BCP4 : 00000001 OSVer : 5_1_2600 SP : 1_0 Product : 256_1

So please Send me a powerful Solution, By which i can get out of this problem which i am facing, I would be thankful if u send it to my email address. omar_khalil@rediff.com.

Thanking you,

Omar.

3 replies

by dmiles

The feature is built in to XP to reboot when ther is a hardware or software conflict.
Check the system for any viruses or spy ware,most likely you are expierencing a software problem that contains code that is causing a problem,sindce the system will reboot when using

I have the same system board with a 2.8 cpu and have only expierenced the restart when their was a hardware conflict.

by rcom

If the answers are sent to your email they will not be available for others to see and possibly use. This forum is helpful because others may have experienced the same problem and an answer could have been posted before. In fact did you search this site for solutions. There are others that have posted simular problems.

You can disable the auto-reboot feature. This will stop it from restarting and a blue screen will appear showing the error message that's causing the problem. To do so click on start then right click on my computer and select properties. Click on the advanced tab then startup and recovery. Uncheck auto-reboot. Report back with the blue screen error message.

Again right click on my computer and this time select manage. Look in the event viewer for errors and report those back.

Get the latest motherboard and video drivers.

by liame

Install XP SP2 and update any and all drivers on the system. That may cure it straight off.

Use a virus checker to check for any viruses - AVG from grisoft is downloadable if you dont have one already. Make sure your definitions are bang up to date. Use Ad-aware and spybot search & destroy (or even the ms spyware beta) to check for and clear out any spyware/malware/scumware.

Have a check that the system board and cpu temps are within acceptable limits. If you dont know what acceptable is just tell us the readings and we'll let you know.

Check the actuall cpu and memory voltages. These can normally be found in the bios - there are quite a few. look for any with warnings next to them first then look for any that are significantly different from their nominal value.

What is the power supply like in your area? If its at all variable invest in a UPS. Even a very cheap one is better than nothing.

Dig around in the system and application logs using event viewer. Find out if its the same process running when the reboots occur everytime or if random. If you can narrow it down to a specific (or even a few) processes try and find out why they are running and what they do. Disable them if you can, and turn off restart system on error for those processes.

This discussion is closed to new replies.