Desktop

Ask something
Discussion Locked

Texas Instruments Microlaser error messa

0 helpful
3 replies

by itsamadworld

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

This printer has a problem when I change out the toner cartridge. I keep getting a "replace waste toner bottle" message but have already changed out the waste toner bottle. TI gave me a work around for this one time, but unfortunately, I've lost the instructions.

Does anyone know about this?
Thanks,
B. Sloan

3 replies

by david.r.smith

When you replace the toner cartridge you also need to replace the waste toner bottle which contains a fuse. If you did that, and you're receiving that error message then reset the fuse flag by:
Turn off the printer power.
Press and hold SELECT and PRINTER SETUP and turn on the printer power.
When the display shows PCU DIAG MODE, release both keys.
Press and hold UP and PREVIOUS at the same time.
When the display shows FUSE FLAG RESET, release both keys.
Turn off the printer power.Turn on the printer power and resume normal operation.

This discussion is closed to new replies.