Discussion Locked
0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
The USB Root Hub has developed a problem on Compaq Presario 5834 running Win98SE after working ok [Compaq IJ600 printer was working & using USB connection.] Device Manager suggests Update Driver, which I've done, to no avail. Is this a driver problem? USB hardware problem? I've removed the device & let Windows detect it. Still no help. Can you help?
5 replies
Check and see if your user has turned off the advanced configeration and power interface. This can be diabled in both the bios and in the control panel. If disabled USB and any firewires will be disabled.
Paul.
by ndluce
The question was auto-closed by TechRepublic
by csmith
If Ans. #1 settings are OK, run a test of the USB Hub by removing it in Device Manager, shutdown, then plug the USB printer cable directly into the Presario, then boot.
If the printer then starts working, the USB Hub is suspect #1.
Regards, Chris
by ndluce
The question was auto-closed by TechRepublic
by ndluce
This question was auto closed due to inactivity
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending
0 helpful
1 reply
Question
Floppy drive wont work on my 486
0 helpful
1 reply
Discussion
How to make light speed agent go away
0 helpful
4 replies
Discussion Locked
Ryzen 7 7700
0 helpful
2 replies
Question Locked
Issue fully resetting my PC
0 helpful
4 replies