There are no easy answers that do not involve some disassembly.
If you are lucky, then perhaps the ribbon cable that connects the display to the system board has some moisture on it and it is blocking the video signals and/or power to the backlight.
The cure for this would be to remove, clean, and reinsert the ribbon cable(s) for the display. On most laptops this can be done after removing the keyboard, and sometimes a panel between the keyboard and the display.
If luck is not on your side, then the laptop screen 'backlight inverter' has fried. The backlight inverter is a high-voltage device in the display which makes the screen light up. In most cases, a PC tech would swap the whole display, and not replace just the ($25) inverter.
If you shine a very bright light at the screen with it on, you may be able to tell whether you have lost the backlight, or whether there is no video signal. You can usually see the backlight around the edges of the display.
Make sure there is not a key-sequence to send video to external monitor. Verify that the PC is booting with an external monitor.