6 replies
by mjd420nova
by kasunray
by ssampier
by hal 9000
I agree the most likely thing is that your system has gone into Hibernation but if that's not the case it's possible that a wire had broken in the Power Lead and stops making contact. If you have a plug in power lead it could be the actual lead which is an easy fix as you just have to try another one and see if it works. In this case if it's doesn't work it's also possible that the socket that you are plugging into needs soldering with an Electronics Soldering Iron as they can work loose but not as often.
If you don't have a plug in lead you'll need to pull the monitors back off and replace the power lead which can be messy with some of the older generation of CRT Monitors as they have a molded filling on the lead that locks it into place.
But with any lead of any kind you never want to pull it through a sharp bend at it's fixing point as they are more likely to break at this point. If the leads are not long enough to comfortably reach the power sockets fit an extension lead to prevent future breakages.
But I would be guessing that as you wobble the leads around you are leaning on the keyboard/Mouse and causing the system to turn back on as a result.
Col
by ron
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending